SnapSync Management
You can manage SnapSync by going to .
UI Element |
Description |
---|---|
SnapSync Service |
Enable or disable the SnapSync service in QuTS hero. You must enable the SnapSync service to create and run SnapSync jobs, and to allow other NAS devices to back up data to this NAS using SnapSync. |
Port |
Displays the port used for incoming and outgoing SnapSync connections. |
SnapSync Settings |
Set the SnapSync port and limit upload rate. For details, see SnapSync Settings. |
SnapSync Performance Report |
View the latest SnapSync performance test results. QuTS hero retains the ten most recent SnapSync performance test results. |
Create a SnapSync Performance Test |
Create and run a SnapSync performance test to measure synchronization performance to a remote destination. For details, see Running a SnapSync Performance Test. |
Create a SnapSync Job |
Create a real-time or scheduled SnapSync job. For details, see Creating a SnapSync Job to a Remote NAS. |
Column Header |
Description |
---|---|
Job Name |
Displays the job's name. |
Source |
Displays the following information:
|
Destination |
Displays the following information:
|
Compression |
Displays whether compression is enabled for this job. |
Deduplication |
Displays whether deduplication is enabled for this job. |
Backup Plan |
Displays the backup plan for this job:
|
Job Status |
Displays the current job status. For details, see the following topics: If QuTS hero is unable to contact the remote NAS, this field displays the last known job status plus (Disconnected). If the job is running, this field also shows job speed real-time and scheduled jobs, and percentage completed for scheduled jobs. |
Data Status |
Displays the current data status. For details, see SnapSync Data Status. For details on available actions under this table header, see SnapSync Job Actions. |
Action |
Edit, delete, suspend, or resume the job, or configure the latency monitor. For details, see SnapSync Job Actions. |