If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.

QNAP

QuTS hero 5.0.x

Download (PDF)

Configuring the Allow/Deny List

Important:

If you have installed QuFirewall on your device, go to QuFirewall to configure the allow or deny list.

  1. Go to Control Panel > System > Security > Allow/Deny List.
  2. Select an option.

    Option

    Description

    User Action

    Allow all connections

    The NAS can connect to all IP addresses and network domains.

    Select Allow all connections.

    Use IP deny list

    The NAS cannot connect to any IP address or network domains included in the IP deny list.

    1. Select Deny connections from the list.

    2. Click Add.

      The IP configuration window appears.

    3. Specify an IP address, netmask, or IP range.

    4. Click Create.

    Tip:

    To remove an IP address, netmask, or IP range, select an entry from the table, and then click Remove.

    Use IP allow list

    The NAS can only connect to the IP addresses or network domains included in the IP allow list.

    1. Select Allow connections from the list only.

    2. Click Add.

      The IP configuration window appears.

    3. Specify an IP address, netmask, or IP range.

    4. Click Create.

    Tip:

    To remove an IP address, netmask, or IP range, select an entry from the table, and then click Remove.

  3. Click Apply.