If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.

QNAP

QuTS hero 5.0.x

Download (PDF)

Enabling or Disabling Wake-on-LAN (WOL)

You can power on the NAS remotely using the Wake-on-LAN (WOL) protocol in Qfinder Pro. This feature is enabled by default.

Important:

If the power cable is disconnected when the NAS is powered off, WOL will not work until the NAS has been manually powered on.

  1. Go to Control Panel > System > Power > Wake-on-LAN (WOL).
  2. Select Enable or Disable.
  3. Click Apply.