If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.


QuTS hero 5.0.x

Download (PDF)

Mapping a LUN to a Fibre Channel Port Group

  1. Go to iSCSI & Fibre Channel > Fibre Channel > FC Storage.
  2. Select a LUN.
  3. Click Action, and then select Edit LUN Mapping.

    The Edit LUN Mapping window opens.

  4. Select Map to FC port group.
  5. Select a Fibre Channel port group.

    The default group contains all Fibre Channel ports.

  6. Choose whether you want to configure LUN masking.



    Enable LUN and do not configure LUN masking

    Do not configure LUN masking. Any initiator that is able to connect to a Fibre Channel port in the port group will be able to see the LUN.

    Keep LUN disabled and configure LUN masking in the next step

    Configure LUN masking. You can restrict which initiators can see the LUN.

  7. Click OK.
  8. Optional: Configure LUN masking.
    1. Add one or more initiator WWPNs to the LUN's authorized initiators list.



      Add from WWPN list

      1. Select one or more initiator WWPNs in the WWPN list.

      2. Click Add.

      Add WWPNs as text

      1. Specify one WWPN per line using any of the following formats:


        • XX:XX:XX:XX:XX:XX:XX:XX

      2. Click Add.

    2. Optional: Select Add unknown WWPNs to the FC WWPN Aliases List.

      When selected, QuTS hero will add any unknown WWPNs to the list of known aliases. To view the list, go to iSCSI & Fibre Channel > Fibre Channel > FC WWPN Aliases.

    3. Optional: Select Enable LUN.

      If selected, QuTS hero enables the LUN after mapping it to the target.

    4. Click OK.