If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.

QNAP

QNE Network 1.0.x

Download (PDF)

Maintaining HA and Device Information

This section provides steps for editing, viewing, or configuring a virtual IP address, device information, notifications, and event logs.

Some actions are only available on the active node device.

All notification rules, including notification rules for applications other than HA Manager, are synced from the active node to the standby node. QuLog Center settings are also synced from the active node to the standby node. For these reasons, although you can view notification history and monitor event logs on the standby node, you cannot modify the notification rules or QuLog Center settings from the standby node.

Action

Availability on Node Device

User Action

Active Node

Standby Node

Adding a virtual IP address

Yes

No

  1. In HA Manager, go to HA Settings > HA Maintenance.

  2. Click Virtual IP address is not configured.

Editing the virtual IP address

Yes

No

  1. In HA Manager, go to HA Settings > HA Maintenance.

  2. Click next to Active Node.

Editing device descriptions

Yes

No

  1. In HA Manager, go to HA Settings > HA Maintenance.

  2. Click under the active node hostname or the standby node hostname.

Editing the HA group ID

Yes

No

  1. In HA Manager, go to HA Settings > HA Maintenance.

  2. Click next to the HA group ID field.

Viewing HA Manager notification history

Yes

Yes

  1. In HA Manager, go to HA Settings > Notification Settings

  2. Click View notification history.

Configuring HA Manager notification rules

Yes

No

  1. In HA Manager, go to HA Settings > Notification Settings

  2. Click Configure Notification Rule.

    The Notification Center application opens.

For details, see "Notification Center" in the QNE User Guide.

Monitoring HA Manager event logs

Yes

Yes

In HA Manager, go to Event Logs.

Managing HA Manager event log settings

Yes

Can view, cannot modify

  • Active node:

    1. Open QuLog Center from the QNE desktop.

      The QuLog Center application opens.

  • Standby node:

    1. In HA Manager, go to Event Logs.

    2. Click QuLog Center.

      The QuLog Center application opens.

For details, see "QuLog Center" in the QNE User Guide.