If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.

QNAP

QNE Network 1.0.x

Download (PDF)

Adding a 1:1 Network Address Translation (NAT) Rule

  1. Open Network Manager.
  2. Go to Advanced Settings > 1:1 NAT & Port Forwarding.
  3. Click Add Rule.

    The Add Rule window appears.

  4. Configure the rule settings.

    Setting

    User Action

    Port

    Select a port.

    Type

    Select 1:1 NAT.

    LAN IP

    Specify the LAN IP address.

    Allowed remote IPs

    Specify one or more remote IP addresses.

    Note:

    Leaving this field blank allows access from any remote IP address.

    Description

    Enter a description for the rule.
  5. Click Apply.

Network Manager adds the rule.