Configuring Other Settings | QNE Network 1.0.x

Open Virtualization Station.

Go to VM List.

Select a VM.

Go to Settings > Other.

Optional: Configure the settings.

Setting	Description
Auto Start Policy	Automatically restarts the VM after the host restarts Tip: If you select None, you have to manually start the VM in case the device restarts. Specify the startup delay between 0 and 600 seconds if you select Retain previous status or Always. Online VMs are suspended before the host shuts down or reboots. VMs that use SATA controllers are shut down using an ACPI signal.
Enable Virtio-serial	Enables communication between the host and virtual machine After enabling this setting, the QNAP Guest Agent can collect virtual machine IP addresses and synchronize VM clocks. Tip: Insert the Guest Tool CD image to install the QNAP Guest Agent.

Setting

Description

Auto Start Policy

Automatically restarts the VM after the host restarts

Tip:

If you select None, you have to manually start the VM in case the device restarts.
Specify the startup delay between 0 and 600 seconds if you select Retain previous status or Always.
Online VMs are suspended before the host shuts down or reboots. VMs that use SATA controllers are shut down using an ACPI signal.

Enable Virtio-serial

Enables communication between the host and virtual machine

After enabling this setting, the QNAP Guest Agent can collect virtual machine IP addresses and synchronize VM clocks.

Tip:

Insert the Guest Tool CD image to install the QNAP Guest Agent.

Click Apply.