If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.

QNAP

QNE Network 1.0.x

Download (PDF)

Adding and Configuring a VLAN

  1. Open Network Manager.
  2. Go to LAN > VLAN.
  3. Click Add VLAN.

    The Add VLAN window appears.

  4. Configure the VLAN settings.

    Setting

    User Action

    LAN interface

    Select a port or trunking group as the LAN interface.

    VLAN ID

    Specify a VLAN ID.

    Important:

    • The VLAN ID must be between 1 and 4094.

    • Make a note of the VLAN ID before completing this process. If the VLAN ID is lost, the network settings will need to be reset.

    Description

    Enter a description between 1 and 32 characters.

    Fixed IP address

    Specify a fixed IP address.

    Tip:

    Examine your network setup for guidance on how to best configure these settings.

    Subnet mask

    Specify the subnet mask used to subdivide your IP address.

    Use static IPv6 address

    Select this option to use IPv6 instead of IPv4. When selected, you must specify the following information:

    • Fixed IP address

    • Prefix length

      Tip:

      Obtain the prefix length information from your network administrator.
  5. Click Apply.

Network Manager adds the VLAN.