If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.

QNAP

QNE Network 1.0.x

Download (PDF)

Adding and Configuring a Port Forwarding Rule

  1. Open Network Manager.
  2. Go to Advanced Settings > 1:1 NAT & Port Forwarding.
  3. Click Add Rule.

    The Add Rule window appears.

  4. Configure the rule settings.

    Setting

    User Action

    Port

    Select a port.

    Type

    Select Port forwarding.

    WAN service port

    Specify the type of WAN service for the rule.

    LAN IP

    Specify the LAN IP address.

    LAN service port

    This field displays LAN service port information.

    Allowed remote IPs

    Specify one or more remote IP addresses.

    Note:

    Leaving this field blank allows access from any remote IP address.

    Description

    Enter a description for the rule.
  5. Click Apply.

Network Manager adds the port forwarding rule.