QNAP

QNE ADRA 1.0.x

Configuring the Network Environment of a Trap Instance

You can configure up to four VLANs per trap instance.

  1. Open ADRA NDR.
  2. Go to Policy Management > Traps.
  3. Identify a trap.
  4. Identify a trap instance.
  5. Click to enable the trap instance.
    Note:

    To configure the network environment of a trap instance, the trap instance must be enabled.

  6. Enable a VLAN.
    1. Under Network, identify a VLAN.
    2. Click .
  7. Optional: Configure an enabled VLAN.
    1. Click .

      The Edit Network window opens.

    2. Click to assign a new randomly generated MAC address.
    3. Click IPv4.
    4. Configure the IPv4 settings.

      Setting

      Description

      Obtain IP address settings automatically via DHCP

      If the network supports DHCP, the device automatically obtains the IP address and network settings.

      Use static IP address

      Manually assign a static IP address. You must specify the following information:

      • Fixed IP address

      • Subnet mask

      • Default gateway
    5. Click DNS.
    6. Configure the DNS settings.

      Setting

      Description

      Obtain DNS server address automatically

      If the network supports DHCP, the device automatically obtains the DNS server address.

      Use static DNS server address

      Manually assign the IP addresses for the primary and secondary DNS servers.
    7. Click Save.