Configuring Port Settings
- Open QuNetSwitch.
- Go to Configuration > Port Management.
- Go to Port Configuration.
- Identify a port.
-
Configure the settings.
Setting
Description
State
Controls the operation status for a port
Speed
Specifies the maximum speed at which a port can operate.
Flow Control
Controls the flow control status for a port
Important:-
When the port speed is set to auto, the maximum speed is advertised to the link partner.
-
When the port speed is fixed, Flow Control automatically matches that speed.
Flow Control is not supported when the port speed is set to HDX.
Maximum Frame Size
Controls the maximum frame size allowed for the port
-
- Click Save.
QuNetSwitch saves the settings.