QNAP

QNE ADRA 1.0.x

Adding a Static MAC Address

The MAC address table tracks MAC addresses and forwards associated unicast traffic through specific ports.

  1. Open QuNetSwitch.
  2. Go to Configuration > MAC Address Table.
  3. Click Add.

    The Add Static MAC Address window opens.

  4. Specify the aging time for the MAC table.
    Note:

    You can configure the amount of time that an entry remains in the MAC table.

  5. Configure the MAC address settings.
    1. Specify a VLAN ID.
    2. Specify a MAC address.
    3. Select at least one port.
  6. Click Save.

    The Add Static MAC Address window closes.

QuNetSwitch adds the MAC address.