QNAP

QNE ADRA 1.0.x

Configuring Loop Protection

A loop occurs when data packets are continually forwarded between ports. If a loop is detected, loop protection can disable the interface.

  1. Open QuNetSwitch.
  2. Go to Configuration > Loop Protection.
  3. Click .
  4. Configure the settings.

    Setting

    Description

    Transmission time

    Controls the time between transmitted loop protection packets

    The value must be from 1 to 10 seconds.

    Shutdown time

    Controls how long to disable a port after detecting a loop

    The value must be from 0 to 604800 seconds.
  5. Click Save.

QuNetSwitch saves the settings.