If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.

QNAP

QuTS hero h5.1.x

Download (PDF)

Configuring EuP mode

Energy-using Products (EuP) is a regulatory directive designed to improve the energy efficiency of electrical devices, reduce the use of hazardous substances, and to reduce the environmental impact of the product. To comply with the EuP directive, EuP mode can be enabled on your QNAP NAS.

  1. Go to Control Panel > System > Power > EuP Mode Configuration.
  2. Select a mode.

    Mode

    Description
    Enable

    When enabled, Wake-on-LAN, power recovery, and power schedule settings are disabled. The NAS keeps power consumption below 1W when powered off.
    Disable

    When disabled, power consumption of the NAS is slightly higher than 1W when powered off. EuP mode is disabled by default.
  3. Click Apply.