Creating a static volume on a drive adapter
- Set the drive adapter to the RAID mode that you want using the device's hardware Mode switch.
-
Install the drive adapter in the
NAS.
For details, see the drive adapter's hardware user guide.
- Go to Storage & Snapshots > Storage > Storage/Snapshots.
-
Perform one of the following
actions.
NAS State
Action
No volumes or storage pools
Click New Volume.
One or more volumes or storage pools
Click Create > New Volume.
The Volume Creation Wizard window opens.
- Select Static Volume.
- Click Next.
- Under Enclosure Unit, select NAS Host.
- In the list of disks, select the drive adapter.
- Under RAID Type, select Single.
- Click Next.
- Optional:
Specify an alias for the
volume.
The alias must consist of 1 to 64 characters from any of the following groups:
-
Letters: A to Z, a to z
-
Numbers: 0 to 9
-
Special characters: Hyphen (-), underscore (_)
-
- Optional:
Encrypt the volume.
QTS encrypts all data on the volume with 256-bit AES encryption.
-
Specify an encryption password.
The password must contain 8 to 32 characters, with any combination of letters, numbers, and special characters. Spaces are not allowed.
Warning:If you forget the encryption password, all data will become inaccessible.
- Verify the encryption password.
- Optional:
Select Auto unlock on
startup.
This setting enables the system to automatically unlock and mount the encrypted volume whenever the NAS starts, without requiring the user to enter the encryption password or encryption key file.
Warning:Enabling this setting can result in unauthorized data access if unauthorized personnel are able to physically access the NAS.
-
Specify an encryption password.
- Optional:
Configure SSD
over-provisioning.
Over-provisioning reserves a percentage of SSD storage space on each disk in the RAID group to improve write performance and extend the disk's lifespan. You can decrease the amount of space reserved for over-provisioning after QTS has created the RAID group.
Tip:To determine the optimal amount of over-provisioning for your SSDs, download and run SSD Profiling Tool from App Center.
- Optional:
Configure advanced
settings.
Setting
Description
User Actions
Alert threshold
QTS issues a warning notification when the percentage of used volume space is equal to or above the specified threshold.
Specify a value.
Accelerate performance with SSD cache
QTS adds data from this volume to the SSD cache to improve read or write performance.
-
Create a shared folder on the volume
QTS automatically creates the shared folder when the volume is ready. Only the user account that creates the shared folder will have read/write access to the folder.
Note:This setting is only available when logged in as "admin".
-
Specify a folder name.
-
Select Create this folder as a snapshot shared folder.
A snapshot shared folder enables faster snapshot creation and restoration.
Bytes per inode
The number of bytes per inode determines the maximum volume size and the number of files and folders that the volume can store. Increasing the number of bytes per inode results in a larger maximum volume size, but a lower maximum number of files and folders.
Select a value.
-
- Click Next.
-
Click Finish.
A confirmation message appears.
- Click OK.
QTS creates and initializes the volume, and then creates the optional shared folder.