If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.

QNAP

QuTS hero h6.0.x

Download (PDF)

Configuring DHCP server settings

The Dynamic Host Configuration Protocol (DHCP) allows devices in a TCP/UDP network to be automatically configured for the network as the device is booted. The DHCP service uses a client-server mechanism, wherein a DHCP server stores and manages network configuration information for clients and offers necessary data when a client requests the information. The information includes the IP address and subnet mask, the IP address of the default gateway, the DNS server IP address, and the IP lease information.

Important:

Do not create a new DHCP server if one already exists on the network. Enabling multiple DHCP servers on the same network can cause IP address conflicts or network access errors.

  1. Go to Control Panel > Network & File Services > Network & Virtual Switch.

    The Network & Virtual Switch window opens.

  2. Go to Network > DHCP Server.
  3. Click Add.

    The Add DHCP Server window opens.

  4. Select an interface.
    Important:

    You can now create a DHCP server even when the adapter is assigned a DHCP IP address. However, it is strongly recommended to use a static IP address to ensure consistent network behavior.

  5. Click Next.
  6. Configure the basic DHCP server settings.
    1. Optional: Click next to the IP address to change the existing IP address.

      The Edit IP Settings window appears.

    2. Specify a fixed IPv4 address.
    3. Select the subnet mask from the drop-down menu.
    4. Specify the default gateway IP address.
    5. Select the jumbo frame to improve network performance when transferring large amounts of data.
    6. Select the appropriate network speed to match your network infrastructure.
    7. Optional: Specify the primary and secondary DNS server IP addresses.
    8. Click Apply.

      The Edit IP Settings window closes.

  7. Specify the starting IP address.
  8. Specify the ending IP address.
  9. Select the subnet mask from the drop-down menu.
  10. Set the lease time for leased IP addresses.
  11. Select a default gateway.
    • Interface IP address: Select to set the default gateway IP address to match the interface IP address configured as the DHCP server.

    • Manual IP: Select to manually enter the default gateway IP address for the DHCP server.

  12. Optional: Specify the primary and secondary DNS server IP addresses.
  13. Optional: Configure the advanced DHCP server settings.
    1. Click Advanced Settings.

      Network & Virtual Switch displays the advanced DHCP server settings.

    2. Enter the IP address of the WINS server to support NetBIOS name resolution.
    3. Specify the domain name to assign to DHCP clients.
    4. Enter the IP address of the TFTP server for clients to download boot files or configuration files.
    5. Specify the boot file name that DHCP clients will download from the TFTP server during network boot.
  14. Add clients and reserve IP addresses.
    1. Click Clients and Reserved IPs.
    2. Click Add.

      The Add Reserved IP window appears.

    3. Enter the device name.
    4. Specify the IP address to reserve the IP address for the device.
    5. Specify the MAC address of the device.
    6. Click Apply.

      The IP reservation window closes.

    Tip:

    To unreserve one or more IP addresses, go to the DHCP Server page and click Add or under Actions for an existing DHCP server. Click Clients and Reserved IPs, select the IP addresses you want to unreserve, click Unreserve, and then click Apply.

  15. Click Apply.

Network & Virtual Switch adds the DHCP server.

Note:
  • When editing DHCP server settings, the interface IP address cannot be modified.

  • The Enable DHCP Server option can be configured during the edit process but is not available when creating a new DHCP server.

  • You can assign the current DHCP IP address of a client device as a reserved IP address to ensure it always receives the same address from the DHCP server.