QNAP

QTS 5.0.x

Binding an iSCSI Target to a Network Interface

You can bind an iSCSI target to one or more network interfaces so that the iSCSI target can only be accessed via specific IP addresses.

  1. Go to iSCSI & Fibre Channel > iSCSI Storage.
  2. Select an iSCSI target.
  3. Click Action, and then select Modify.

    The Modify an iSCSI Target window opens.

  4. Select Network Portal.
  5. Optional: Select one or more network interfaces to bind to the iSCSI target.
  6. Optional: Deselect one or more network interfaces to remove from the iSCSI target.
  7. Click Apply.

QTS applies the iSCSI target binding settings.