|
Action |
Description |
|---|---|
|
Disk Info |
Displays disk details, including the disk manufacturer, model, serial number, disk capacity, bus type, firmware version, ATA version, and ATA standard. |
|
Disk Health |
Displays disk S.M.A.R.T. information. For details, see Disk Health Information. |
|
Scan for Bad Blocks |
Scan the disk for bad blocks. Tip:
Run this scan if the disk's status changes to Warning or Error. If QTS does not detect any bad blocks, the status changes back to Ready. To view the number of bad blocks, see . |
|
Locate |
Prompt the drive LEDs to blink so that you can locate the drive in a NAS or expansion unit. |
|
Detach |
Remove the disk from its RAID group. The group must be of type: RAID 1, RAID 5, RAID 6, RAID 10. |
|
Set as Enclosure Spare |
Assign the disk as a global hot spare for all RAID groups within the same enclosure (NAS or expansion unit). For details, see Configuring an Enclosure Spare Disk. |
|
Disable Spare |
Unassign the disk as a global hot spare. |
|
New Volume |
Create a new volume. For details, see Volume Creation. |
|
Secure Erase |
Permanently erase all data on a disk. For details, see Secure Erase. |
|
RAID Group |
Select a RAID group to view its RAID type, capacity, and member disks. |