Configuring General Hardware Settings

Enable configuration reset switch

Select this option to enable the reset button.

For details, see System Reset and Restore to Factory Default.

Enable disk standby mode

Select this option to allow the NAS drives to enter standby mode if there is no disk access within the specified period. Disk status LED remains on during standby mode.

Enable light signal alert

Select this option to allow the status LED to flash when free space on the NAS is less than the set value.

Enable write cache (EXT4 delay allocation)

If the NAS disk volume uses EXT4, select this option for higher write performance.

If the NAS is set as a shared storage in a virtualized or clustered environment, disable this option.

Enable redundant power supply mode

Select this option to enable the redundant power supply.

Run user-defined processes during startup

Select this option to run user-defined processes during startup.

Turn on LED

Select this option to turn on the LED, set its brightness level, and set a schedule for brightness setting.