Go to , select an expansion unit, and then click Recover to perform one of the following actions.
Action |
Description |
---|---|
Reinitialize enclosure ID |
Reset all expansion unit IDs, and then give each unit a new ID number starting from 1 based on the order than they are physically connected. Tip:
Use this action if the expansion unit IDs appear out of sequential order in the enclosure list. |
Attach and Recover Storage Pool |
Scan all free disks on the NAS and all connected expansion units for existing volumes, LUNs, and storage pools. Tip:
Perform this action after moving disks between NAS devices. |