Do not disconnect any disks or power off the NAS while secure erase is running.
The Secure Erase window opens.
Mode |
Description |
---|---|
Complete |
QTS writes over all blocks on the disk with zeros or ones. This mode is the most secure but can take a long time to finish. Select Customized to configure the following the erase settings.
|
SSD |
QTS issues a solid state drive (SSD) secure erase ATA command. The SSD firmware then erases all data and restores the disk to its original factory performance. Important:
This feature is only supported on specific SSD models. |
Fast |
QTS overwrites the partition and RAID configuration data on the disk with zeros. This mode is the quickest but is less secure than the other modes. |
You must be logged in as an administrator.
QTS starts erasing the disk. You can monitor the progress in Background Tasks.