Advanced ACL
Note: The following information only applies to ARM-based NAS models with firmware version 3.3.0 or later and x86-based NAS models running firmware version 3.2.0 or later. |
You can create a LUN masking policy to configure permissions of iSCSI initiators which attempt to access the LUN mapped to the iSCSI targets on the NAS. To use this feature, click "Add a Policy" under "Advanced ACL".
Enter the policy name, the initiator IQN, and assign access rights for each LUN on the NAS.
• | Read-only: The connected initiator can only read the data from the LUN. |
• | Read/Write: The connected initiator has read and write access right to the LUN. |
• | Deny Access: The LUN is invisible to the connected initiator. |
If no LUN masking policy is specified for a connected iSCSI initiator, the default policy (Read/Write) will be applied. You can click "Edit" to edit the default policy.
Note: Make sure you have created at least one LUN on the NAS before editing the default LUN policy. |
Hint: How do I find the initiator IQN? Start the Microsoft iSCSI initiator and click "General". You will find the IQN of the initiator. |
© 2017 QNAP Systems, Inc. |
|