If this document does not correspond to your current software version, you can go to Download Center to find other available document versions.

QNAP

QSS and QSS Pro

Download (PDF)

Adding an IPv6 static route

  1. Log in to the switch system.
  2. Go to Configuration > Routing.

    The IPv4 Static Route page appears.

  3. Click IPv6 Static Route.
  4. Click Add.

    The Add IPv6 Static Route window appears.

  5. Optional: Next to Default route, click .

    The static route is selected as the default routing interface.

  6. Specify a static IP address where connections are routed to.
  7. Select the prefix length for IPv6 addressing.
  8. Specify the gateway IP address of the interface that will act as the next hop for this route.
  9. Select a preconfigured VLAN ID.
  10. Click Save.

The switch creates the IPv6 static route.