Accessing the NAS Using a Browser

You can access the NAS using any computer on the network if you know its IP address and the logon credentials of a valid user account.

Tip:

  • By default, you can access the NAS using the NAS management interface, which usually supports 1 Gbps. To access the NAS using a different interface (for example, one that supports 10 Gbps), enable service binding and then configure NAS Web Management Interface. For details, see Service Binding.

  • If you do not know the IP address of the NAS, you can locate it using Qfinder Pro.

    For details, see Accessing the NAS Using Qfinder Pro.

  1. Verify that your computer is connected to the same network as the NAS.
  2. Open a web browser on your computer.
  3. Type the IP address of the NAS in the address bar.

    The QES login screen appears.

  4. Specify your username and password.

    The default username is admin.

    The default admin password depends on the QES version:

    • Before QES 2.1.1 build 20200424: admin

    • QES 2.1.1 build 2020424: The NAS serial number in lowercase

    • QES 2.1.1 build 20200515 or later: The NAS serial number in uppercase

  5. Click Login.

    The QES desktop appears.

Parent topic: NAS Access