QNAP Turbo NAS Software User Manual

Hardware Installation

Hardware Installation

Previous topic Next topic No directory for this topic  

Hardware Installation

Previous topic Next topic Topic directory requires JavaScript JavaScript is required for the print function Mail us feedback on this topic!  

After unpacking the NAS from the package, please first follow the instructions below to install your hardware:

1.Install the hard drives. Please also make sure that the hard drives (HDDs) that you use are compatible with the NAS. Go to the Hard Disk Drive Compatibility List section for more details.
2.Connect the QNAP NAS to the same network as your PC and power it on. During your installation process, please pay attention to LEDs and alarm buzzers to make sure that the NAS functions properly. Go to the Checking System Status section for details.

 

Note: The steps above are also illustrated in the Quick Installation Guide (QIG) that can be found in the product package or QNAP website (http://start.qnap.com).

 

 

 

 


© 2015 QNAP Systems, Inc. All Rights Reserved.