Recovering a RAID Group

RAID recovery enables you to recover a RAID group in the event of accidental disk removal or SATA connector failure. When several disks are removed or disconnected from a RAID group:


RAID recovery only helps when disks are temporarily disconnected and then reconnected. It does not help in the event of disk failure.

  1. Reconnect all disconnected disks.

    Ensure that each disk is reinserted into its original drive bay.

  2. Go to Main Menu > Storage & Snapshots > Storage/Snapshot.
  3. Select a storage pool or single static volume with the status Inactive.
  4. Click Manage.
  5. Select a RAID group with the status Error.
  6. Click Manage and then select Recover.

    The RAID group starts to rebuild.